Author Archives: clem.law@usa.net

1955 Fire Box Telephone

Before the widespread availability of cellular phones, or even landline phones, the problem of alerting the fire department to an emergency was solved in many localities by the fire alarm call box, which dates back to the 1850’s. The device was essentially a telegraph sender. When it was pulled, it would encode a message via a rotary sender to headquarters. The message would indicate only that the alarm had been pulled, and the location. Apparently, the call box also had a telegraph key, which would allow responding firefighters or police to call back to the station to request a backup.

It wasn’t until 70 years ago that the system was updated by the addition of a telephone. This photo, from the November 1955 issue of Popular Electronics, shows this young woman calling in an emergency somewhere in Omaha, where the new boxes were being field tested by Bell Labs. They would soon be available in Indianapolis, Miami, Syracuse, and Sioux Falls.

As with the old call boxes, merely lifting the receiver from the hook would flash an alarm signal with location to headquarters. This young woman seems to have her wits about her, but the magazine noted that if the person was too excited to speak, the message would still get through. The operator at headquarters had the ability to transfer the call, such as to police headquarters. The phone would also allow responding police officers or firefighters to call directly to headquarters. Before the days of handheld radios, it wasn’t unusual for cops walking a beat to periodically phone in to the station with one of these.

When I was growing up in the 1960s and 70s, there was such a call box located on a utility pole across the street from our house. (We were also across the street from a school, which might have been the reason it was located there, to prevent another tragedy such as the 1958 Our Lady of the Angels fire in which help was delayed due to the lack of a call box. (A passing motorist saw the fire and went to a store to call the fire department, but was initially refused because the phone wasn’t for public use.)

I don’t remember whether the alarm near our house had a phone, or just an alarm to be pulled. I never got a close look at it, because I knew it wasn’t the kind of thing that I should mess with in the absence of a real emergency. False alarms were surprisingly rare. On a handful of occasions, I recall a fire truck showing up, looking around to confirm that there wasn’t any fire, and then resetting the alarm. But that didn’t happen very often.



Armistice Day Blizzard

Armistice Day Blizzard, Excelsior Blvd., West of Minneapolis. Minn. Historical Society photo, NOAA.

Today marks the 85th anniversary of the Armistice Day Blizzard of November 11, 1940. Here are some of our previous posts:

 



Zenith M660A “Explorer” Receiver, 1965

Sixty years ago this month, the November 1965 issue of Electronics Illustrated introduced the Zenith Model M660A “Explorer” receiver.  It covered longwave, the standard AM band, and shortwave, and included a BFO.  The picture here doesn’t really do it credit, but the handsome set really would have been in place in the living room.

You can see the set in operation at this video.

 



1940 Automatic Soldering Iron Switch

This helpful hint appeared 85 years ago in the British Practical Wireless magazine, November 1940. At first, I thought the idea had been sent in by Rube Goldberg, but it was actually one J. F. H. Aspinwall of Wirrall. who sometimes plugged in the soldering iron and forgot about it. His solution solved that problem, and also let him know when the iron was hot enough. He rested a piece of solder between one buzzer contact, with the other end on the iron, perched precariously above the other contact. When the iron was hot enough, the end of solder melted and the piece dropped onto the other contact, completing the circuit and sounding the buzzer.



1940 Bike Radio

Eighty-five years ago, this couple enjoy a favorite radio program as the pedal the streets and roads, thanks to a three-tube radio that works in practically the same manner as a car radio. Two of the tubes are triple purpose, in addition to the power tube feeding the 4-inch speaker. The set came with antenna, mounting hardware, and the battery, which can be seen on the frame.

The radio appears to be the Motorola B-150, which we have previously written about.



Grote-Rankin Co., Seattle, 1925

If you were in the market for a radio in Seattle a hundred years ago today, your timing was perfect.

The radio department of the Grote-Rankin Company, Fifth Avenue and Pike Street was getting ready for the Christmas season, and the decision was to concentrate on a small number of models.  That meant that they had to make space for them, and they were offering these attractive closeout prices on many of the models they had in stock.

The lowest priced option was the Crosley Model 52, for $16.50.  It was a three-tube TRF featuring a regenerative detectors.  While it had no speaker and required headphones, that set would have been sensitive enough to pull in just about any signal.  The high-end buyer might be interested in the Radiola 160, originally $560, now on sale for only $315.  That was a top-of-the-line set featured a six-tube superheterodyne receiver, and an acoustic phonograph.  The set shared the horn between the radio and phonograph, and undoubtedly had room-filling audio.

The ad appeared in the Seattle Star, November 6, 1925.



1940 Soldering Clamps

Eighty-five years ago this month, the November 1940 issue of Popular Science showed these ideas for homemade clamps for soldering small pieces. Both use a clothespin, one with two wood screws, filed flat, and the other uses two bent nails. Either one will hold the work in place while being soldered.



Radio Sound Effects 1940

Shown here is Robert Monroe, the author of the NBC drama “Rocky Gordon.” He is at the New York Central Yards at Weehawken NJ, recording the sound of locomotives and railroad yards for the sound effects to be aired.

The photo appeared 85 years ago this month on the cover of the November 1940 issue of Radio Craft.  Interestingly, one of the few references to the radio program is on the CIA website,  undoubtedly in relation to Monroe’s involvement with the  the U.S. Army Intelligence and Security command.



1955 One-Tube Reflex Radio

Despite its nondescript looks, this one-tube broadcast receiver from 70 years ago was a good performer. It was designed to be small and efficient. It consumed about the same amount of power as an electric clock, meaning that it could be run constantly. And because of the low power consumption, it put out little heat and could be mounted in a wall or a piece of furniture, without having to worry about ventilation. It was said to put out enough volume to fill the room, but not enough to bother the neighbors.

When tested 100 miles from Chicago, it pulled in all of the major Chicago stations during the day with just a 12 inch antenna. This was accomplished by reflexing the 6AU6 to serve as both RF and AF amplifier. A diode was used as detector, and the rectifier was selenium.  It appeared in the November 1955 issue of Popular Electronics.



Wartime Halloween

Happy Halloween from OneTubeRadio.com!

Just because there was a war going on didn’t mean that Halloween shouldn’t take place as scheduled. The cover of this 1943 issue of Collier’s magazine shows that even the Jack O’Lantern had gone to war. Instead of a scary face, it was proclaiming V for victory. In addition to the letter V, it included the …- Morse code for the letter.